tripal_doxygen.config 71 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716
  1. # Doxyfile 1.7.4
  2. # This file describes the settings to be used by the documentation system
  3. # doxygen (www.doxygen.org) for a project.
  4. #
  5. # All text after a hash (#) is considered a comment and will be ignored.
  6. # The format is:
  7. # TAG = value [value, ...]
  8. # For lists items can also be appended using:
  9. # TAG += value [value, ...]
  10. # Values that contain spaces should be placed between quotes (" ").
  11. #---------------------------------------------------------------------------
  12. # Project related configuration options
  13. #---------------------------------------------------------------------------
  14. # This tag specifies the encoding used for all characters in the config file
  15. # that follow. The default is UTF-8 which is also the encoding used for all
  16. # text before the first occurrence of this tag. Doxygen uses libiconv (or the
  17. # iconv built into libc) for the transcoding. See
  18. # http://www.gnu.org/software/libiconv for the list of possible encodings.
  19. DOXYFILE_ENCODING = UTF-8
  20. # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
  21. # by quotes) that should identify the project.
  22. PROJECT_NAME = Tripal
  23. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
  24. # This could be handy for archiving the generated documentation or
  25. # if some version control system is used.
  26. PROJECT_NUMBER = "v1.1 (6.x-1.1)"
  27. # Using the PROJECT_BRIEF tag one can provide an optional one line description
  28. # for a project that appears at the top of each page and should give viewer
  29. # a quick idea about the purpose of the project. Keep the description short.
  30. PROJECT_BRIEF =
  31. # With the PROJECT_LOGO tag one can specify an logo or icon that is
  32. # included in the documentation. The maximum height of the logo should not
  33. # exceed 55 pixels and the maximum width should not exceed 200 pixels.
  34. # Doxygen will copy the logo to the output directory.
  35. PROJECT_LOGO =
  36. # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
  37. # base path where the generated documentation will be put.
  38. # If a relative path is entered, it will be relative to the location
  39. # where doxygen was started. If left blank the current directory will be used.
  40. OUTPUT_DIRECTORY = docs
  41. # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
  42. # 4096 sub-directories (in 2 levels) under the output directory of each output
  43. # format and will distribute the generated files over these directories.
  44. # Enabling this option can be useful when feeding doxygen a huge amount of
  45. # source files, where putting all generated files in the same directory would
  46. # otherwise cause performance problems for the file system.
  47. CREATE_SUBDIRS = YES
  48. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
  49. # documentation generated by doxygen is written. Doxygen will use this
  50. # information to generate all constant output in the proper language.
  51. # The default language is English, other supported languages are:
  52. # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
  53. # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
  54. # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
  55. # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
  56. # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
  57. # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
  58. OUTPUT_LANGUAGE = English
  59. # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
  60. # include brief member descriptions after the members that are listed in
  61. # the file and class documentation (similar to JavaDoc).
  62. # Set to NO to disable this.
  63. BRIEF_MEMBER_DESC = YES
  64. # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
  65. # the brief description of a member or function before the detailed description.
  66. # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
  67. # brief descriptions will be completely suppressed.
  68. REPEAT_BRIEF = YES
  69. # This tag implements a quasi-intelligent brief description abbreviator
  70. # that is used to form the text in various listings. Each string
  71. # in this list, if found as the leading text of the brief description, will be
  72. # stripped from the text and the result after processing the whole list, is
  73. # used as the annotated text. Otherwise, the brief description is used as-is.
  74. # If left blank, the following values are used ("$name" is automatically
  75. # replaced with the name of the entity): "The $name class" "The $name widget"
  76. # "The $name file" "is" "provides" "specifies" "contains"
  77. # "represents" "a" "an" "the"
  78. ABBREVIATE_BRIEF =
  79. # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
  80. # Doxygen will generate a detailed section even if there is only a brief
  81. # description.
  82. ALWAYS_DETAILED_SEC = NO
  83. # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
  84. # inherited members of a class in the documentation of that class as if those
  85. # members were ordinary class members. Constructors, destructors and assignment
  86. # operators of the base classes will not be shown.
  87. INLINE_INHERITED_MEMB = NO
  88. # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
  89. # path before files name in the file list and in the header files. If set
  90. # to NO the shortest path that makes the file name unique will be used.
  91. FULL_PATH_NAMES = YES
  92. # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
  93. # can be used to strip a user-defined part of the path. Stripping is
  94. # only done if one of the specified strings matches the left-hand part of
  95. # the path. The tag can be used to show relative paths in the file list.
  96. # If left blank the directory from which doxygen is run is used as the
  97. # path to strip.
  98. STRIP_FROM_PATH =
  99. # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
  100. # the path mentioned in the documentation of a class, which tells
  101. # the reader which header file to include in order to use a class.
  102. # If left blank only the name of the header file containing the class
  103. # definition is used. Otherwise one should specify the include paths that
  104. # are normally passed to the compiler using the -I flag.
  105. STRIP_FROM_INC_PATH =
  106. # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
  107. # (but less readable) file names. This can be useful if your file system
  108. # doesn't support long names like on DOS, Mac, or CD-ROM.
  109. SHORT_NAMES = NO
  110. # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
  111. # will interpret the first line (until the first dot) of a JavaDoc-style
  112. # comment as the brief description. If set to NO, the JavaDoc
  113. # comments will behave just like regular Qt-style comments
  114. # (thus requiring an explicit @brief command for a brief description.)
  115. JAVADOC_AUTOBRIEF = NO
  116. # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
  117. # interpret the first line (until the first dot) of a Qt-style
  118. # comment as the brief description. If set to NO, the comments
  119. # will behave just like regular Qt-style comments (thus requiring
  120. # an explicit \brief command for a brief description.)
  121. QT_AUTOBRIEF = NO
  122. # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
  123. # treat a multi-line C++ special comment block (i.e. a block of //! or ///
  124. # comments) as a brief description. This used to be the default behaviour.
  125. # The new default is to treat a multi-line C++ comment block as a detailed
  126. # description. Set this tag to YES if you prefer the old behaviour instead.
  127. MULTILINE_CPP_IS_BRIEF = NO
  128. # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
  129. # member inherits the documentation from any documented member that it
  130. # re-implements.
  131. INHERIT_DOCS = YES
  132. # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
  133. # a new page for each member. If set to NO, the documentation of a member will
  134. # be part of the file/class/namespace that contains it.
  135. SEPARATE_MEMBER_PAGES = NO
  136. # The TAB_SIZE tag can be used to set the number of spaces in a tab.
  137. # Doxygen uses this value to replace tabs by spaces in code fragments.
  138. TAB_SIZE = 8
  139. # This tag can be used to specify a number of aliases that acts
  140. # as commands in the documentation. An alias has the form "name=value".
  141. # For example adding "sideeffect=\par Side Effects:\n" will allow you to
  142. # put the command \sideeffect (or @sideeffect) in the documentation, which
  143. # will result in a user-defined paragraph with heading "Side Effects:".
  144. # You can put \n's in the value part of an alias to insert newlines.
  145. ALIASES =
  146. # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
  147. # sources only. Doxygen will then generate output that is more tailored for C.
  148. # For instance, some of the names that are used will be different. The list
  149. # of all members will be omitted, etc.
  150. OPTIMIZE_OUTPUT_FOR_C = NO
  151. # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
  152. # sources only. Doxygen will then generate output that is more tailored for
  153. # Java. For instance, namespaces will be presented as packages, qualified
  154. # scopes will look different, etc.
  155. OPTIMIZE_OUTPUT_JAVA = NO
  156. # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
  157. # sources only. Doxygen will then generate output that is more tailored for
  158. # Fortran.
  159. OPTIMIZE_FOR_FORTRAN = NO
  160. # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
  161. # sources. Doxygen will then generate output that is tailored for
  162. # VHDL.
  163. OPTIMIZE_OUTPUT_VHDL = NO
  164. # Doxygen selects the parser to use depending on the extension of the files it
  165. # parses. With this tag you can assign which parser to use for a given extension.
  166. # Doxygen has a built-in mapping, but you can override or extend it using this
  167. # tag. The format is ext=language, where ext is a file extension, and language
  168. # is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
  169. # C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
  170. # doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
  171. # (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
  172. # you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
  173. EXTENSION_MAPPING =
  174. # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
  175. # to include (a tag file for) the STL sources as input, then you should
  176. # set this tag to YES in order to let doxygen match functions declarations and
  177. # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
  178. # func(std::string) {}). This also makes the inheritance and collaboration
  179. # diagrams that involve STL classes more complete and accurate.
  180. BUILTIN_STL_SUPPORT = NO
  181. # If you use Microsoft's C++/CLI language, you should set this option to YES to
  182. # enable parsing support.
  183. CPP_CLI_SUPPORT = NO
  184. # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
  185. # Doxygen will parse them like normal C++ but will assume all classes use public
  186. # instead of private inheritance when no explicit protection keyword is present.
  187. SIP_SUPPORT = NO
  188. # For Microsoft's IDL there are propget and propput attributes to indicate getter
  189. # and setter methods for a property. Setting this option to YES (the default)
  190. # will make doxygen replace the get and set methods by a property in the
  191. # documentation. This will only work if the methods are indeed getting or
  192. # setting a simple type. If this is not the case, or you want to show the
  193. # methods anyway, you should set this option to NO.
  194. IDL_PROPERTY_SUPPORT = YES
  195. # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
  196. # tag is set to YES, then doxygen will reuse the documentation of the first
  197. # member in the group (if any) for the other members of the group. By default
  198. # all members of a group must be documented explicitly.
  199. DISTRIBUTE_GROUP_DOC = NO
  200. # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
  201. # the same type (for instance a group of public functions) to be put as a
  202. # subgroup of that type (e.g. under the Public Functions section). Set it to
  203. # NO to prevent subgrouping. Alternatively, this can be done per class using
  204. # the \nosubgrouping command.
  205. SUBGROUPING = YES
  206. # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
  207. # unions are shown inside the group in which they are included (e.g. using
  208. # @ingroup) instead of on a separate page (for HTML and Man pages) or
  209. # section (for LaTeX and RTF).
  210. INLINE_GROUPED_CLASSES = NO
  211. # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
  212. # is documented as struct, union, or enum with the name of the typedef. So
  213. # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
  214. # with name TypeT. When disabled the typedef will appear as a member of a file,
  215. # namespace, or class. And the struct will be named TypeS. This can typically
  216. # be useful for C code in case the coding convention dictates that all compound
  217. # types are typedef'ed and only the typedef is referenced, never the tag name.
  218. TYPEDEF_HIDES_STRUCT = NO
  219. # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
  220. # determine which symbols to keep in memory and which to flush to disk.
  221. # When the cache is full, less often used symbols will be written to disk.
  222. # For small to medium size projects (<1000 input files) the default value is
  223. # probably good enough. For larger projects a too small cache size can cause
  224. # doxygen to be busy swapping symbols to and from disk most of the time
  225. # causing a significant performance penalty.
  226. # If the system has enough physical memory increasing the cache will improve the
  227. # performance by keeping more symbols in memory. Note that the value works on
  228. # a logarithmic scale so increasing the size by one will roughly double the
  229. # memory usage. The cache size is given by this formula:
  230. # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
  231. # corresponding to a cache size of 2^16 = 65536 symbols
  232. SYMBOL_CACHE_SIZE = 0
  233. #---------------------------------------------------------------------------
  234. # Build related configuration options
  235. #---------------------------------------------------------------------------
  236. # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
  237. # documentation are documented, even if no documentation was available.
  238. # Private class members and static file members will be hidden unless
  239. # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
  240. EXTRACT_ALL = YES
  241. # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
  242. # will be included in the documentation.
  243. EXTRACT_PRIVATE = YES
  244. # If the EXTRACT_STATIC tag is set to YES all static members of a file
  245. # will be included in the documentation.
  246. EXTRACT_STATIC = YES
  247. # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
  248. # defined locally in source files will be included in the documentation.
  249. # If set to NO only classes defined in header files are included.
  250. EXTRACT_LOCAL_CLASSES = YES
  251. # This flag is only useful for Objective-C code. When set to YES local
  252. # methods, which are defined in the implementation section but not in
  253. # the interface are included in the documentation.
  254. # If set to NO (the default) only methods in the interface are included.
  255. EXTRACT_LOCAL_METHODS = NO
  256. # If this flag is set to YES, the members of anonymous namespaces will be
  257. # extracted and appear in the documentation as a namespace called
  258. # 'anonymous_namespace{file}', where file will be replaced with the base
  259. # name of the file that contains the anonymous namespace. By default
  260. # anonymous namespaces are hidden.
  261. EXTRACT_ANON_NSPACES = NO
  262. # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
  263. # undocumented members of documented classes, files or namespaces.
  264. # If set to NO (the default) these members will be included in the
  265. # various overviews, but no documentation section is generated.
  266. # This option has no effect if EXTRACT_ALL is enabled.
  267. HIDE_UNDOC_MEMBERS = NO
  268. # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
  269. # undocumented classes that are normally visible in the class hierarchy.
  270. # If set to NO (the default) these classes will be included in the various
  271. # overviews. This option has no effect if EXTRACT_ALL is enabled.
  272. HIDE_UNDOC_CLASSES = NO
  273. # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
  274. # friend (class|struct|union) declarations.
  275. # If set to NO (the default) these declarations will be included in the
  276. # documentation.
  277. HIDE_FRIEND_COMPOUNDS = NO
  278. # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
  279. # documentation blocks found inside the body of a function.
  280. # If set to NO (the default) these blocks will be appended to the
  281. # function's detailed documentation block.
  282. HIDE_IN_BODY_DOCS = NO
  283. # The INTERNAL_DOCS tag determines if documentation
  284. # that is typed after a \internal command is included. If the tag is set
  285. # to NO (the default) then the documentation will be excluded.
  286. # Set it to YES to include the internal documentation.
  287. INTERNAL_DOCS = NO
  288. # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
  289. # file names in lower-case letters. If set to YES upper-case letters are also
  290. # allowed. This is useful if you have classes or files whose names only differ
  291. # in case and if your file system supports case sensitive file names. Windows
  292. # and Mac users are advised to set this option to NO.
  293. CASE_SENSE_NAMES = YES
  294. # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
  295. # will show members with their full class and namespace scopes in the
  296. # documentation. If set to YES the scope will be hidden.
  297. HIDE_SCOPE_NAMES = NO
  298. # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
  299. # will put a list of the files that are included by a file in the documentation
  300. # of that file.
  301. SHOW_INCLUDE_FILES = YES
  302. # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
  303. # will list include files with double quotes in the documentation
  304. # rather than with sharp brackets.
  305. FORCE_LOCAL_INCLUDES = NO
  306. # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
  307. # is inserted in the documentation for inline members.
  308. INLINE_INFO = YES
  309. # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
  310. # will sort the (detailed) documentation of file and class members
  311. # alphabetically by member name. If set to NO the members will appear in
  312. # declaration order.
  313. SORT_MEMBER_DOCS = YES
  314. # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
  315. # brief documentation of file, namespace and class members alphabetically
  316. # by member name. If set to NO (the default) the members will appear in
  317. # declaration order.
  318. SORT_BRIEF_DOCS = NO
  319. # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
  320. # will sort the (brief and detailed) documentation of class members so that
  321. # constructors and destructors are listed first. If set to NO (the default)
  322. # the constructors will appear in the respective orders defined by
  323. # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
  324. # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
  325. # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
  326. SORT_MEMBERS_CTORS_1ST = NO
  327. # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
  328. # hierarchy of group names into alphabetical order. If set to NO (the default)
  329. # the group names will appear in their defined order.
  330. SORT_GROUP_NAMES = NO
  331. # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
  332. # sorted by fully-qualified names, including namespaces. If set to
  333. # NO (the default), the class list will be sorted only by class name,
  334. # not including the namespace part.
  335. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
  336. # Note: This option applies only to the class list, not to the
  337. # alphabetical list.
  338. SORT_BY_SCOPE_NAME = NO
  339. # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
  340. # do proper type resolution of all parameters of a function it will reject a
  341. # match between the prototype and the implementation of a member function even
  342. # if there is only one candidate or it is obvious which candidate to choose
  343. # by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
  344. # will still accept a match between prototype and implementation in such cases.
  345. STRICT_PROTO_MATCHING = NO
  346. # The GENERATE_TODOLIST tag can be used to enable (YES) or
  347. # disable (NO) the todo list. This list is created by putting \todo
  348. # commands in the documentation.
  349. GENERATE_TODOLIST = NO
  350. # The GENERATE_TESTLIST tag can be used to enable (YES) or
  351. # disable (NO) the test list. This list is created by putting \test
  352. # commands in the documentation.
  353. GENERATE_TESTLIST = YES
  354. # The GENERATE_BUGLIST tag can be used to enable (YES) or
  355. # disable (NO) the bug list. This list is created by putting \bug
  356. # commands in the documentation.
  357. GENERATE_BUGLIST = YES
  358. # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
  359. # disable (NO) the deprecated list. This list is created by putting
  360. # \deprecated commands in the documentation.
  361. GENERATE_DEPRECATEDLIST= YES
  362. # The ENABLED_SECTIONS tag can be used to enable conditional
  363. # documentation sections, marked by \if sectionname ... \endif.
  364. ENABLED_SECTIONS =
  365. # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
  366. # the initial value of a variable or macro consists of for it to appear in
  367. # the documentation. If the initializer consists of more lines than specified
  368. # here it will be hidden. Use a value of 0 to hide initializers completely.
  369. # The appearance of the initializer of individual variables and macros in the
  370. # documentation can be controlled using \showinitializer or \hideinitializer
  371. # command in the documentation regardless of this setting.
  372. MAX_INITIALIZER_LINES = 30
  373. # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
  374. # at the bottom of the documentation of classes and structs. If set to YES the
  375. # list will mention the files that were used to generate the documentation.
  376. SHOW_USED_FILES = YES
  377. # If the sources in your project are distributed over multiple directories
  378. # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
  379. # in the documentation. The default is NO.
  380. SHOW_DIRECTORIES = YES
  381. # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
  382. # This will remove the Files entry from the Quick Index and from the
  383. # Folder Tree View (if specified). The default is YES.
  384. SHOW_FILES = YES
  385. # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
  386. # Namespaces page.
  387. # This will remove the Namespaces entry from the Quick Index
  388. # and from the Folder Tree View (if specified). The default is YES.
  389. SHOW_NAMESPACES = YES
  390. # The FILE_VERSION_FILTER tag can be used to specify a program or script that
  391. # doxygen should invoke to get the current version for each file (typically from
  392. # the version control system). Doxygen will invoke the program by executing (via
  393. # popen()) the command <command> <input-file>, where <command> is the value of
  394. # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
  395. # provided by doxygen. Whatever the program writes to standard output
  396. # is used as the file version. See the manual for examples.
  397. FILE_VERSION_FILTER =
  398. # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
  399. # by doxygen. The layout file controls the global structure of the generated
  400. # output files in an output format independent way. The create the layout file
  401. # that represents doxygen's defaults, run doxygen with the -l option.
  402. # You can optionally specify a file name after the option, if omitted
  403. # DoxygenLayout.xml will be used as the name of the layout file.
  404. LAYOUT_FILE =
  405. #---------------------------------------------------------------------------
  406. # configuration options related to warning and progress messages
  407. #---------------------------------------------------------------------------
  408. # The QUIET tag can be used to turn on/off the messages that are generated
  409. # by doxygen. Possible values are YES and NO. If left blank NO is used.
  410. QUIET = NO
  411. # The WARNINGS tag can be used to turn on/off the warning messages that are
  412. # generated by doxygen. Possible values are YES and NO. If left blank
  413. # NO is used.
  414. WARNINGS = YES
  415. # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
  416. # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
  417. # automatically be disabled.
  418. WARN_IF_UNDOCUMENTED = YES
  419. # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
  420. # potential errors in the documentation, such as not documenting some
  421. # parameters in a documented function, or documenting parameters that
  422. # don't exist or using markup commands wrongly.
  423. WARN_IF_DOC_ERROR = YES
  424. # The WARN_NO_PARAMDOC option can be enabled to get warnings for
  425. # functions that are documented, but have no documentation for their parameters
  426. # or return value. If set to NO (the default) doxygen will only warn about
  427. # wrong or incomplete parameter documentation, but not about the absence of
  428. # documentation.
  429. WARN_NO_PARAMDOC = NO
  430. # The WARN_FORMAT tag determines the format of the warning messages that
  431. # doxygen can produce. The string should contain the $file, $line, and $text
  432. # tags, which will be replaced by the file and line number from which the
  433. # warning originated and the warning text. Optionally the format may contain
  434. # $version, which will be replaced by the version of the file (if it could
  435. # be obtained via FILE_VERSION_FILTER)
  436. WARN_FORMAT = "$file:$line: $text"
  437. # The WARN_LOGFILE tag can be used to specify a file to which warning
  438. # and error messages should be written. If left blank the output is written
  439. # to stderr.
  440. WARN_LOGFILE =
  441. #---------------------------------------------------------------------------
  442. # configuration options related to the input files
  443. #---------------------------------------------------------------------------
  444. # The INPUT tag can be used to specify the files and/or directories that contain
  445. # documented source files. You may enter file names like "myfile.cpp" or
  446. # directories like "/usr/src/myproject". Separate the files or directories
  447. # with spaces.
  448. INPUT = tripal_core tripal_db tripal_cv tripal_organism tripal_analysis tripal_feature tripal_stock tripal_project tripal_natural_diversity tripal_genetic tripal_views tripal_bulk_loader tripal_library tripal_contact tripal_featuremap tripal_phenotype
  449. # This tag can be used to specify the character encoding of the source files
  450. # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
  451. # also the default input encoding. Doxygen uses libiconv (or the iconv built
  452. # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
  453. # the list of possible encodings.
  454. INPUT_ENCODING = UTF-8
  455. # If the value of the INPUT tag contains directories, you can use the
  456. # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
  457. # and *.h) to filter out the source-files in the directories. If left
  458. # blank the following patterns are tested:
  459. # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
  460. # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
  461. # *.f90 *.f *.for *.vhd *.vhdl
  462. FILE_PATTERNS = *.php *.inc *.module
  463. # The RECURSIVE tag can be used to turn specify whether or not subdirectories
  464. # should be searched for input files as well. Possible values are YES and NO.
  465. # If left blank NO is used.
  466. RECURSIVE = YES
  467. # The EXCLUDE tag can be used to specify files and/or directories that should
  468. # excluded from the INPUT source files. This way you can easily exclude a
  469. # subdirectory from a directory tree whose root is specified with the INPUT tag.
  470. EXCLUDE =
  471. # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
  472. # directories that are symbolic links (a Unix file system feature) are excluded
  473. # from the input.
  474. EXCLUDE_SYMLINKS = YES
  475. # If the value of the INPUT tag contains directories, you can use the
  476. # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
  477. # certain files from those directories. Note that the wildcards are matched
  478. # against the file with absolute path, so to exclude all test directories
  479. # for example use the pattern */test/*
  480. EXCLUDE_PATTERNS =
  481. # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
  482. # (namespaces, classes, functions, etc.) that should be excluded from the
  483. # output. The symbol name can be a fully qualified name, a word, or if the
  484. # wildcard * is used, a substring. Examples: ANamespace, AClass,
  485. # AClass::ANamespace, ANamespace::*Test
  486. EXCLUDE_SYMBOLS =
  487. # The EXAMPLE_PATH tag can be used to specify one or more files or
  488. # directories that contain example code fragments that are included (see
  489. # the \include command).
  490. EXAMPLE_PATH =
  491. # If the value of the EXAMPLE_PATH tag contains directories, you can use the
  492. # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
  493. # and *.h) to filter out the source-files in the directories. If left
  494. # blank all files are included.
  495. EXAMPLE_PATTERNS =
  496. # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
  497. # searched for input files to be used with the \include or \dontinclude
  498. # commands irrespective of the value of the RECURSIVE tag.
  499. # Possible values are YES and NO. If left blank NO is used.
  500. EXAMPLE_RECURSIVE = NO
  501. # The IMAGE_PATH tag can be used to specify one or more files or
  502. # directories that contain image that are included in the documentation (see
  503. # the \image command).
  504. IMAGE_PATH =
  505. # The INPUT_FILTER tag can be used to specify a program that doxygen should
  506. # invoke to filter for each input file. Doxygen will invoke the filter program
  507. # by executing (via popen()) the command <filter> <input-file>, where <filter>
  508. # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
  509. # input file. Doxygen will then use the output that the filter program writes
  510. # to standard output.
  511. # If FILTER_PATTERNS is specified, this tag will be
  512. # ignored.
  513. INPUT_FILTER =
  514. # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
  515. # basis.
  516. # Doxygen will compare the file name with each pattern and apply the
  517. # filter if there is a match.
  518. # The filters are a list of the form:
  519. # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
  520. # info on how filters are used. If FILTER_PATTERNS is empty or if
  521. # non of the patterns match the file name, INPUT_FILTER is applied.
  522. FILTER_PATTERNS =
  523. # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
  524. # INPUT_FILTER) will be used to filter the input files when producing source
  525. # files to browse (i.e. when SOURCE_BROWSER is set to YES).
  526. FILTER_SOURCE_FILES = NO
  527. # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
  528. # pattern. A pattern will override the setting for FILTER_PATTERN (if any)
  529. # and it is also possible to disable source filtering for a specific pattern
  530. # using *.ext= (so without naming a filter). This option only has effect when
  531. # FILTER_SOURCE_FILES is enabled.
  532. FILTER_SOURCE_PATTERNS =
  533. #---------------------------------------------------------------------------
  534. # configuration options related to source browsing
  535. #---------------------------------------------------------------------------
  536. # If the SOURCE_BROWSER tag is set to YES then a list of source files will
  537. # be generated. Documented entities will be cross-referenced with these sources.
  538. # Note: To get rid of all source code in the generated output, make sure also
  539. # VERBATIM_HEADERS is set to NO.
  540. SOURCE_BROWSER = YES
  541. # Setting the INLINE_SOURCES tag to YES will include the body
  542. # of functions and classes directly in the documentation.
  543. INLINE_SOURCES = YES
  544. # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
  545. # doxygen to hide any special comment blocks from generated source code
  546. # fragments. Normal C and C++ comments will always remain visible.
  547. STRIP_CODE_COMMENTS = YES
  548. # If the REFERENCED_BY_RELATION tag is set to YES
  549. # then for each documented function all documented
  550. # functions referencing it will be listed.
  551. REFERENCED_BY_RELATION = NO
  552. # If the REFERENCES_RELATION tag is set to YES
  553. # then for each documented function all documented entities
  554. # called/used by that function will be listed.
  555. REFERENCES_RELATION = NO
  556. # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
  557. # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
  558. # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
  559. # link to the source code.
  560. # Otherwise they will link to the documentation.
  561. REFERENCES_LINK_SOURCE = YES
  562. # If the USE_HTAGS tag is set to YES then the references to source code
  563. # will point to the HTML generated by the htags(1) tool instead of doxygen
  564. # built-in source browser. The htags tool is part of GNU's global source
  565. # tagging system (see http://www.gnu.org/software/global/global.html). You
  566. # will need version 4.8.6 or higher.
  567. USE_HTAGS = NO
  568. # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
  569. # will generate a verbatim copy of the header file for each class for
  570. # which an include is specified. Set to NO to disable this.
  571. VERBATIM_HEADERS = YES
  572. #---------------------------------------------------------------------------
  573. # configuration options related to the alphabetical class index
  574. #---------------------------------------------------------------------------
  575. # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
  576. # of all compounds will be generated. Enable this if the project
  577. # contains a lot of classes, structs, unions or interfaces.
  578. ALPHABETICAL_INDEX = YES
  579. # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
  580. # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
  581. # in which this list will be split (can be a number in the range [1..20])
  582. COLS_IN_ALPHA_INDEX = 5
  583. # In case all classes in a project start with a common prefix, all
  584. # classes will be put under the same header in the alphabetical index.
  585. # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
  586. # should be ignored while generating the index headers.
  587. IGNORE_PREFIX =
  588. #---------------------------------------------------------------------------
  589. # configuration options related to the HTML output
  590. #---------------------------------------------------------------------------
  591. # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
  592. # generate HTML output.
  593. GENERATE_HTML = YES
  594. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
  595. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  596. # put in front of it. If left blank `html' will be used as the default path.
  597. HTML_OUTPUT = html
  598. # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
  599. # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
  600. # doxygen will generate files with .html extension.
  601. HTML_FILE_EXTENSION = .html
  602. # The HTML_HEADER tag can be used to specify a personal HTML header for
  603. # each generated HTML page. If it is left blank doxygen will generate a
  604. # standard header. Note that when using a custom header you are responsible
  605. # for the proper inclusion of any scripts and style sheets that doxygen
  606. # needs, which is dependent on the configuration options used.
  607. # It is adviced to generate a default header using "doxygen -w html
  608. # header.html footer.html stylesheet.css YourConfigFile" and then modify
  609. # that header. Note that the header is subject to change so you typically
  610. # have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW!
  611. HTML_HEADER =
  612. # The HTML_FOOTER tag can be used to specify a personal HTML footer for
  613. # each generated HTML page. If it is left blank doxygen will generate a
  614. # standard footer.
  615. HTML_FOOTER =
  616. # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
  617. # style sheet that is used by each HTML page. It can be used to
  618. # fine-tune the look of the HTML output. If the tag is left blank doxygen
  619. # will generate a default style sheet. Note that doxygen will try to copy
  620. # the style sheet file to the HTML output directory, so don't put your own
  621. # stylesheet in the HTML output directory as well, or it will be erased!
  622. HTML_STYLESHEET =
  623. # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
  624. # other source files which should be copied to the HTML output directory. Note
  625. # that these files will be copied to the base HTML output directory. Use the
  626. # $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
  627. # files. In the HTML_STYLESHEET file, use the file name only. Also note that
  628. # the files will be copied as-is; there are no commands or markers available.
  629. HTML_EXTRA_FILES =
  630. # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
  631. # Doxygen will adjust the colors in the stylesheet and background images
  632. # according to this color. Hue is specified as an angle on a colorwheel,
  633. # see http://en.wikipedia.org/wiki/Hue for more information.
  634. # For instance the value 0 represents red, 60 is yellow, 120 is green,
  635. # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
  636. # The allowed range is 0 to 359.
  637. HTML_COLORSTYLE_HUE = 220
  638. # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
  639. # the colors in the HTML output. For a value of 0 the output will use
  640. # grayscales only. A value of 255 will produce the most vivid colors.
  641. HTML_COLORSTYLE_SAT = 100
  642. # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
  643. # the luminance component of the colors in the HTML output. Values below
  644. # 100 gradually make the output lighter, whereas values above 100 make
  645. # the output darker. The value divided by 100 is the actual gamma applied,
  646. # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
  647. # and 100 does not change the gamma.
  648. HTML_COLORSTYLE_GAMMA = 80
  649. # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
  650. # page will contain the date and time when the page was generated. Setting
  651. # this to NO can help when comparing the output of multiple runs.
  652. HTML_TIMESTAMP = YES
  653. # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
  654. # files or namespaces will be aligned in HTML using tables. If set to
  655. # NO a bullet list will be used.
  656. HTML_ALIGN_MEMBERS = YES
  657. # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
  658. # documentation will contain sections that can be hidden and shown after the
  659. # page has loaded. For this to work a browser that supports
  660. # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
  661. # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
  662. HTML_DYNAMIC_SECTIONS = YES
  663. # If the GENERATE_DOCSET tag is set to YES, additional index files
  664. # will be generated that can be used as input for Apple's Xcode 3
  665. # integrated development environment, introduced with OSX 10.5 (Leopard).
  666. # To create a documentation set, doxygen will generate a Makefile in the
  667. # HTML output directory. Running make will produce the docset in that
  668. # directory and running "make install" will install the docset in
  669. # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
  670. # it at startup.
  671. # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
  672. # for more information.
  673. GENERATE_DOCSET = NO
  674. # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
  675. # feed. A documentation feed provides an umbrella under which multiple
  676. # documentation sets from a single provider (such as a company or product suite)
  677. # can be grouped.
  678. DOCSET_FEEDNAME = "Doxygen generated docs"
  679. # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
  680. # should uniquely identify the documentation set bundle. This should be a
  681. # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
  682. # will append .docset to the name.
  683. DOCSET_BUNDLE_ID = org.doxygen.Project
  684. # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
  685. # the documentation publisher. This should be a reverse domain-name style
  686. # string, e.g. com.mycompany.MyDocSet.documentation.
  687. DOCSET_PUBLISHER_ID = org.doxygen.Publisher
  688. # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
  689. DOCSET_PUBLISHER_NAME = Publisher
  690. # If the GENERATE_HTMLHELP tag is set to YES, additional index files
  691. # will be generated that can be used as input for tools like the
  692. # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
  693. # of the generated HTML documentation.
  694. GENERATE_HTMLHELP = NO
  695. # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
  696. # be used to specify the file name of the resulting .chm file. You
  697. # can add a path in front of the file if the result should not be
  698. # written to the html output directory.
  699. CHM_FILE =
  700. # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
  701. # be used to specify the location (absolute path including file name) of
  702. # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
  703. # the HTML help compiler on the generated index.hhp.
  704. HHC_LOCATION =
  705. # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
  706. # controls if a separate .chi index file is generated (YES) or that
  707. # it should be included in the master .chm file (NO).
  708. GENERATE_CHI = NO
  709. # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
  710. # is used to encode HtmlHelp index (hhk), content (hhc) and project file
  711. # content.
  712. CHM_INDEX_ENCODING =
  713. # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
  714. # controls whether a binary table of contents is generated (YES) or a
  715. # normal table of contents (NO) in the .chm file.
  716. BINARY_TOC = NO
  717. # The TOC_EXPAND flag can be set to YES to add extra items for group members
  718. # to the contents of the HTML help documentation and to the tree view.
  719. TOC_EXPAND = NO
  720. # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
  721. # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
  722. # that can be used as input for Qt's qhelpgenerator to generate a
  723. # Qt Compressed Help (.qch) of the generated HTML documentation.
  724. GENERATE_QHP = NO
  725. # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
  726. # be used to specify the file name of the resulting .qch file.
  727. # The path specified is relative to the HTML output folder.
  728. QCH_FILE =
  729. # The QHP_NAMESPACE tag specifies the namespace to use when generating
  730. # Qt Help Project output. For more information please see
  731. # http://doc.trolltech.com/qthelpproject.html#namespace
  732. QHP_NAMESPACE = org.doxygen.Project
  733. # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
  734. # Qt Help Project output. For more information please see
  735. # http://doc.trolltech.com/qthelpproject.html#virtual-folders
  736. QHP_VIRTUAL_FOLDER = doc
  737. # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
  738. # add. For more information please see
  739. # http://doc.trolltech.com/qthelpproject.html#custom-filters
  740. QHP_CUST_FILTER_NAME =
  741. # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
  742. # custom filter to add. For more information please see
  743. # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
  744. # Qt Help Project / Custom Filters</a>.
  745. QHP_CUST_FILTER_ATTRS =
  746. # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
  747. # project's
  748. # filter section matches.
  749. # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
  750. # Qt Help Project / Filter Attributes</a>.
  751. QHP_SECT_FILTER_ATTRS =
  752. # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
  753. # be used to specify the location of Qt's qhelpgenerator.
  754. # If non-empty doxygen will try to run qhelpgenerator on the generated
  755. # .qhp file.
  756. QHG_LOCATION =
  757. # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
  758. # will be generated, which together with the HTML files, form an Eclipse help
  759. # plugin. To install this plugin and make it available under the help contents
  760. # menu in Eclipse, the contents of the directory containing the HTML and XML
  761. # files needs to be copied into the plugins directory of eclipse. The name of
  762. # the directory within the plugins directory should be the same as
  763. # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
  764. # the help appears.
  765. GENERATE_ECLIPSEHELP = NO
  766. # A unique identifier for the eclipse help plugin. When installing the plugin
  767. # the directory name containing the HTML and XML files should also have
  768. # this name.
  769. ECLIPSE_DOC_ID = org.doxygen.Project
  770. # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
  771. # top of each HTML page. The value NO (the default) enables the index and
  772. # the value YES disables it.
  773. DISABLE_INDEX = NO
  774. # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
  775. # (range [0,1..20]) that doxygen will group on one line in the generated HTML
  776. # documentation. Note that a value of 0 will completely suppress the enum
  777. # values from appearing in the overview section.
  778. ENUM_VALUES_PER_LINE = 4
  779. # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
  780. # structure should be generated to display hierarchical information.
  781. # If the tag value is set to YES, a side panel will be generated
  782. # containing a tree-like index structure (just like the one that
  783. # is generated for HTML Help). For this to work a browser that supports
  784. # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
  785. # Windows users are probably better off using the HTML help feature.
  786. GENERATE_TREEVIEW = YES
  787. # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
  788. # and Class Hierarchy pages using a tree view instead of an ordered list.
  789. USE_INLINE_TREES = YES
  790. # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
  791. # used to set the initial width (in pixels) of the frame in which the tree
  792. # is shown.
  793. TREEVIEW_WIDTH = 250
  794. # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
  795. # links to external symbols imported via tag files in a separate window.
  796. EXT_LINKS_IN_WINDOW = NO
  797. # Use this tag to change the font size of Latex formulas included
  798. # as images in the HTML documentation. The default is 10. Note that
  799. # when you change the font size after a successful doxygen run you need
  800. # to manually remove any form_*.png images from the HTML output directory
  801. # to force them to be regenerated.
  802. FORMULA_FONTSIZE = 10
  803. # Use the FORMULA_TRANPARENT tag to determine whether or not the images
  804. # generated for formulas are transparent PNGs. Transparent PNGs are
  805. # not supported properly for IE 6.0, but are supported on all modern browsers.
  806. # Note that when changing this option you need to delete any form_*.png files
  807. # in the HTML output before the changes have effect.
  808. FORMULA_TRANSPARENT = YES
  809. # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
  810. # (see http://www.mathjax.org) which uses client side Javascript for the
  811. # rendering instead of using prerendered bitmaps. Use this if you do not
  812. # have LaTeX installed or if you want to formulas look prettier in the HTML
  813. # output. When enabled you also need to install MathJax separately and
  814. # configure the path to it using the MATHJAX_RELPATH option.
  815. USE_MATHJAX = NO
  816. # When MathJax is enabled you need to specify the location relative to the
  817. # HTML output directory using the MATHJAX_RELPATH option. The destination
  818. # directory should contain the MathJax.js script. For instance, if the mathjax
  819. # directory is located at the same level as the HTML output directory, then
  820. # MATHJAX_RELPATH should be ../mathjax. The default value points to the
  821. # mathjax.org site, so you can quickly see the result without installing
  822. # MathJax, but it is strongly recommended to install a local copy of MathJax
  823. # before deployment.
  824. MATHJAX_RELPATH = http://www.mathjax.org/mathjax
  825. # When the SEARCHENGINE tag is enabled doxygen will generate a search box
  826. # for the HTML output. The underlying search engine uses javascript
  827. # and DHTML and should work on any modern browser. Note that when using
  828. # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
  829. # (GENERATE_DOCSET) there is already a search function so this one should
  830. # typically be disabled. For large projects the javascript based search engine
  831. # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
  832. SEARCHENGINE = YES
  833. # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
  834. # implemented using a PHP enabled web server instead of at the web client
  835. # using Javascript. Doxygen will generate the search PHP script and index
  836. # file to put on the web server. The advantage of the server
  837. # based approach is that it scales better to large projects and allows
  838. # full text search. The disadvantages are that it is more difficult to setup
  839. # and does not have live searching capabilities.
  840. SERVER_BASED_SEARCH = NO
  841. #---------------------------------------------------------------------------
  842. # configuration options related to the LaTeX output
  843. #---------------------------------------------------------------------------
  844. # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
  845. # generate Latex output.
  846. GENERATE_LATEX = NO
  847. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
  848. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  849. # put in front of it. If left blank `latex' will be used as the default path.
  850. LATEX_OUTPUT = latex
  851. # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
  852. # invoked. If left blank `latex' will be used as the default command name.
  853. # Note that when enabling USE_PDFLATEX this option is only used for
  854. # generating bitmaps for formulas in the HTML output, but not in the
  855. # Makefile that is written to the output directory.
  856. LATEX_CMD_NAME = latex
  857. # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
  858. # generate index for LaTeX. If left blank `makeindex' will be used as the
  859. # default command name.
  860. MAKEINDEX_CMD_NAME = makeindex
  861. # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
  862. # LaTeX documents. This may be useful for small projects and may help to
  863. # save some trees in general.
  864. COMPACT_LATEX = NO
  865. # The PAPER_TYPE tag can be used to set the paper type that is used
  866. # by the printer. Possible values are: a4, letter, legal and
  867. # executive. If left blank a4wide will be used.
  868. PAPER_TYPE = a4
  869. # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
  870. # packages that should be included in the LaTeX output.
  871. EXTRA_PACKAGES =
  872. # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
  873. # the generated latex document. The header should contain everything until
  874. # the first chapter. If it is left blank doxygen will generate a
  875. # standard header. Notice: only use this tag if you know what you are doing!
  876. LATEX_HEADER =
  877. # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
  878. # the generated latex document. The footer should contain everything after
  879. # the last chapter. If it is left blank doxygen will generate a
  880. # standard footer. Notice: only use this tag if you know what you are doing!
  881. LATEX_FOOTER =
  882. # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
  883. # is prepared for conversion to pdf (using ps2pdf). The pdf file will
  884. # contain links (just like the HTML output) instead of page references
  885. # This makes the output suitable for online browsing using a pdf viewer.
  886. PDF_HYPERLINKS = YES
  887. # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
  888. # plain latex in the generated Makefile. Set this option to YES to get a
  889. # higher quality PDF documentation.
  890. USE_PDFLATEX = YES
  891. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
  892. # command to the generated LaTeX files. This will instruct LaTeX to keep
  893. # running if errors occur, instead of asking the user for help.
  894. # This option is also used when generating formulas in HTML.
  895. LATEX_BATCHMODE = NO
  896. # If LATEX_HIDE_INDICES is set to YES then doxygen will not
  897. # include the index chapters (such as File Index, Compound Index, etc.)
  898. # in the output.
  899. LATEX_HIDE_INDICES = NO
  900. # If LATEX_SOURCE_CODE is set to YES then doxygen will include
  901. # source code with syntax highlighting in the LaTeX output.
  902. # Note that which sources are shown also depends on other settings
  903. # such as SOURCE_BROWSER.
  904. LATEX_SOURCE_CODE = NO
  905. #---------------------------------------------------------------------------
  906. # configuration options related to the RTF output
  907. #---------------------------------------------------------------------------
  908. # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
  909. # The RTF output is optimized for Word 97 and may not look very pretty with
  910. # other RTF readers or editors.
  911. GENERATE_RTF = NO
  912. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
  913. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  914. # put in front of it. If left blank `rtf' will be used as the default path.
  915. RTF_OUTPUT = rtf
  916. # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
  917. # RTF documents. This may be useful for small projects and may help to
  918. # save some trees in general.
  919. COMPACT_RTF = NO
  920. # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
  921. # will contain hyperlink fields. The RTF file will
  922. # contain links (just like the HTML output) instead of page references.
  923. # This makes the output suitable for online browsing using WORD or other
  924. # programs which support those fields.
  925. # Note: wordpad (write) and others do not support links.
  926. RTF_HYPERLINKS = NO
  927. # Load stylesheet definitions from file. Syntax is similar to doxygen's
  928. # config file, i.e. a series of assignments. You only have to provide
  929. # replacements, missing definitions are set to their default value.
  930. RTF_STYLESHEET_FILE =
  931. # Set optional variables used in the generation of an rtf document.
  932. # Syntax is similar to doxygen's config file.
  933. RTF_EXTENSIONS_FILE =
  934. #---------------------------------------------------------------------------
  935. # configuration options related to the man page output
  936. #---------------------------------------------------------------------------
  937. # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
  938. # generate man pages
  939. GENERATE_MAN = NO
  940. # The MAN_OUTPUT tag is used to specify where the man pages will be put.
  941. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  942. # put in front of it. If left blank `man' will be used as the default path.
  943. MAN_OUTPUT = man
  944. # The MAN_EXTENSION tag determines the extension that is added to
  945. # the generated man pages (default is the subroutine's section .3)
  946. MAN_EXTENSION = .3
  947. # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
  948. # then it will generate one additional man file for each entity
  949. # documented in the real man page(s). These additional files
  950. # only source the real man page, but without them the man command
  951. # would be unable to find the correct page. The default is NO.
  952. MAN_LINKS = NO
  953. #---------------------------------------------------------------------------
  954. # configuration options related to the XML output
  955. #---------------------------------------------------------------------------
  956. # If the GENERATE_XML tag is set to YES Doxygen will
  957. # generate an XML file that captures the structure of
  958. # the code including all documentation.
  959. GENERATE_XML = NO
  960. # The XML_OUTPUT tag is used to specify where the XML pages will be put.
  961. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  962. # put in front of it. If left blank `xml' will be used as the default path.
  963. XML_OUTPUT = xml
  964. # The XML_SCHEMA tag can be used to specify an XML schema,
  965. # which can be used by a validating XML parser to check the
  966. # syntax of the XML files.
  967. XML_SCHEMA =
  968. # The XML_DTD tag can be used to specify an XML DTD,
  969. # which can be used by a validating XML parser to check the
  970. # syntax of the XML files.
  971. XML_DTD =
  972. # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
  973. # dump the program listings (including syntax highlighting
  974. # and cross-referencing information) to the XML output. Note that
  975. # enabling this will significantly increase the size of the XML output.
  976. XML_PROGRAMLISTING = YES
  977. #---------------------------------------------------------------------------
  978. # configuration options for the AutoGen Definitions output
  979. #---------------------------------------------------------------------------
  980. # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
  981. # generate an AutoGen Definitions (see autogen.sf.net) file
  982. # that captures the structure of the code including all
  983. # documentation. Note that this feature is still experimental
  984. # and incomplete at the moment.
  985. GENERATE_AUTOGEN_DEF = NO
  986. #---------------------------------------------------------------------------
  987. # configuration options related to the Perl module output
  988. #---------------------------------------------------------------------------
  989. # If the GENERATE_PERLMOD tag is set to YES Doxygen will
  990. # generate a Perl module file that captures the structure of
  991. # the code including all documentation. Note that this
  992. # feature is still experimental and incomplete at the
  993. # moment.
  994. GENERATE_PERLMOD = NO
  995. # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
  996. # the necessary Makefile rules, Perl scripts and LaTeX code to be able
  997. # to generate PDF and DVI output from the Perl module output.
  998. PERLMOD_LATEX = NO
  999. # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
  1000. # nicely formatted so it can be parsed by a human reader.
  1001. # This is useful
  1002. # if you want to understand what is going on.
  1003. # On the other hand, if this
  1004. # tag is set to NO the size of the Perl module output will be much smaller
  1005. # and Perl will parse it just the same.
  1006. PERLMOD_PRETTY = YES
  1007. # The names of the make variables in the generated doxyrules.make file
  1008. # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
  1009. # This is useful so different doxyrules.make files included by the same
  1010. # Makefile don't overwrite each other's variables.
  1011. PERLMOD_MAKEVAR_PREFIX =
  1012. #---------------------------------------------------------------------------
  1013. # Configuration options related to the preprocessor
  1014. #---------------------------------------------------------------------------
  1015. # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
  1016. # evaluate all C-preprocessor directives found in the sources and include
  1017. # files.
  1018. ENABLE_PREPROCESSING = YES
  1019. # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
  1020. # names in the source code. If set to NO (the default) only conditional
  1021. # compilation will be performed. Macro expansion can be done in a controlled
  1022. # way by setting EXPAND_ONLY_PREDEF to YES.
  1023. MACRO_EXPANSION = NO
  1024. # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
  1025. # then the macro expansion is limited to the macros specified with the
  1026. # PREDEFINED and EXPAND_AS_DEFINED tags.
  1027. EXPAND_ONLY_PREDEF = NO
  1028. # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
  1029. # pointed to by INCLUDE_PATH will be searched when a #include is found.
  1030. SEARCH_INCLUDES = YES
  1031. # The INCLUDE_PATH tag can be used to specify one or more directories that
  1032. # contain include files that are not input files but should be processed by
  1033. # the preprocessor.
  1034. INCLUDE_PATH =
  1035. # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
  1036. # patterns (like *.h and *.hpp) to filter out the header-files in the
  1037. # directories. If left blank, the patterns specified with FILE_PATTERNS will
  1038. # be used.
  1039. INCLUDE_FILE_PATTERNS =
  1040. # The PREDEFINED tag can be used to specify one or more macro names that
  1041. # are defined before the preprocessor is started (similar to the -D option of
  1042. # gcc). The argument of the tag is a list of macros of the form: name
  1043. # or name=definition (no spaces). If the definition and the = are
  1044. # omitted =1 is assumed. To prevent a macro definition from being
  1045. # undefined via #undef or recursively expanded use the := operator
  1046. # instead of the = operator.
  1047. PREDEFINED =
  1048. # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
  1049. # this tag can be used to specify a list of macro names that should be expanded.
  1050. # The macro definition that is found in the sources will be used.
  1051. # Use the PREDEFINED tag if you want to use a different macro definition that
  1052. # overrules the definition found in the source code.
  1053. EXPAND_AS_DEFINED =
  1054. # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
  1055. # doxygen's preprocessor will remove all references to function-like macros
  1056. # that are alone on a line, have an all uppercase name, and do not end with a
  1057. # semicolon, because these will confuse the parser if not removed.
  1058. SKIP_FUNCTION_MACROS = YES
  1059. #---------------------------------------------------------------------------
  1060. # Configuration::additions related to external references
  1061. #---------------------------------------------------------------------------
  1062. # The TAGFILES option can be used to specify one or more tagfiles.
  1063. # Optionally an initial location of the external documentation
  1064. # can be added for each tagfile. The format of a tag file without
  1065. # this location is as follows:
  1066. #
  1067. # TAGFILES = file1 file2 ...
  1068. # Adding location for the tag files is done as follows:
  1069. #
  1070. # TAGFILES = file1=loc1 "file2 = loc2" ...
  1071. # where "loc1" and "loc2" can be relative or absolute paths or
  1072. # URLs. If a location is present for each tag, the installdox tool
  1073. # does not have to be run to correct the links.
  1074. # Note that each tag file must have a unique name
  1075. # (where the name does NOT include the path)
  1076. # If a tag file is not located in the directory in which doxygen
  1077. # is run, you must also specify the path to the tagfile here.
  1078. TAGFILES =
  1079. # When a file name is specified after GENERATE_TAGFILE, doxygen will create
  1080. # a tag file that is based on the input files it reads.
  1081. GENERATE_TAGFILE =
  1082. # If the ALLEXTERNALS tag is set to YES all external classes will be listed
  1083. # in the class index. If set to NO only the inherited external classes
  1084. # will be listed.
  1085. ALLEXTERNALS = NO
  1086. # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
  1087. # in the modules index. If set to NO, only the current project's groups will
  1088. # be listed.
  1089. EXTERNAL_GROUPS = YES
  1090. # The PERL_PATH should be the absolute path and name of the perl script
  1091. # interpreter (i.e. the result of `which perl').
  1092. PERL_PATH = /usr/bin/perl
  1093. #---------------------------------------------------------------------------
  1094. # Configuration options related to the dot tool
  1095. #---------------------------------------------------------------------------
  1096. # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
  1097. # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
  1098. # or super classes. Setting the tag to NO turns the diagrams off. Note that
  1099. # this option also works with HAVE_DOT disabled, but it is recommended to
  1100. # install and use dot, since it yields more powerful graphs.
  1101. CLASS_DIAGRAMS = YES
  1102. # You can define message sequence charts within doxygen comments using the \msc
  1103. # command. Doxygen will then run the mscgen tool (see
  1104. # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
  1105. # documentation. The MSCGEN_PATH tag allows you to specify the directory where
  1106. # the mscgen tool resides. If left empty the tool is assumed to be found in the
  1107. # default search path.
  1108. MSCGEN_PATH =
  1109. # If set to YES, the inheritance and collaboration graphs will hide
  1110. # inheritance and usage relations if the target is undocumented
  1111. # or is not a class.
  1112. HIDE_UNDOC_RELATIONS = YES
  1113. # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
  1114. # available from the path. This tool is part of Graphviz, a graph visualization
  1115. # toolkit from AT&T and Lucent Bell Labs. The other options in this section
  1116. # have no effect if this option is set to NO (the default)
  1117. HAVE_DOT = NO
  1118. # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
  1119. # allowed to run in parallel. When set to 0 (the default) doxygen will
  1120. # base this on the number of processors available in the system. You can set it
  1121. # explicitly to a value larger than 0 to get control over the balance
  1122. # between CPU load and processing speed.
  1123. DOT_NUM_THREADS = 0
  1124. # By default doxygen will write a font called Helvetica to the output
  1125. # directory and reference it in all dot files that doxygen generates.
  1126. # When you want a differently looking font you can specify the font name
  1127. # using DOT_FONTNAME. You need to make sure dot is able to find the font,
  1128. # which can be done by putting it in a standard location or by setting the
  1129. # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
  1130. # containing the font.
  1131. DOT_FONTNAME = Helvetica
  1132. # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
  1133. # The default size is 10pt.
  1134. DOT_FONTSIZE = 10
  1135. # By default doxygen will tell dot to use the output directory to look for the
  1136. # FreeSans.ttf font (which doxygen will put there itself). If you specify a
  1137. # different font using DOT_FONTNAME you can set the path where dot
  1138. # can find it using this tag.
  1139. DOT_FONTPATH =
  1140. # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
  1141. # will generate a graph for each documented class showing the direct and
  1142. # indirect inheritance relations. Setting this tag to YES will force the
  1143. # the CLASS_DIAGRAMS tag to NO.
  1144. CLASS_GRAPH = YES
  1145. # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
  1146. # will generate a graph for each documented class showing the direct and
  1147. # indirect implementation dependencies (inheritance, containment, and
  1148. # class references variables) of the class with other documented classes.
  1149. COLLABORATION_GRAPH = YES
  1150. # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
  1151. # will generate a graph for groups, showing the direct groups dependencies
  1152. GROUP_GRAPHS = YES
  1153. # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
  1154. # collaboration diagrams in a style similar to the OMG's Unified Modeling
  1155. # Language.
  1156. UML_LOOK = NO
  1157. # If set to YES, the inheritance and collaboration graphs will show the
  1158. # relations between templates and their instances.
  1159. TEMPLATE_RELATIONS = NO
  1160. # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
  1161. # tags are set to YES then doxygen will generate a graph for each documented
  1162. # file showing the direct and indirect include dependencies of the file with
  1163. # other documented files.
  1164. INCLUDE_GRAPH = YES
  1165. # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
  1166. # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
  1167. # documented header file showing the documented files that directly or
  1168. # indirectly include this file.
  1169. INCLUDED_BY_GRAPH = YES
  1170. # If the CALL_GRAPH and HAVE_DOT options are set to YES then
  1171. # doxygen will generate a call dependency graph for every global function
  1172. # or class method. Note that enabling this option will significantly increase
  1173. # the time of a run. So in most cases it will be better to enable call graphs
  1174. # for selected functions only using the \callgraph command.
  1175. CALL_GRAPH = NO
  1176. # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
  1177. # doxygen will generate a caller dependency graph for every global function
  1178. # or class method. Note that enabling this option will significantly increase
  1179. # the time of a run. So in most cases it will be better to enable caller
  1180. # graphs for selected functions only using the \callergraph command.
  1181. CALLER_GRAPH = NO
  1182. # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
  1183. # will generate a graphical hierarchy of all classes instead of a textual one.
  1184. GRAPHICAL_HIERARCHY = YES
  1185. # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
  1186. # then doxygen will show the dependencies a directory has on other directories
  1187. # in a graphical way. The dependency relations are determined by the #include
  1188. # relations between the files in the directories.
  1189. DIRECTORY_GRAPH = YES
  1190. # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
  1191. # generated by dot. Possible values are svg, png, jpg, or gif.
  1192. # If left blank png will be used.
  1193. DOT_IMAGE_FORMAT = png
  1194. # The tag DOT_PATH can be used to specify the path where the dot tool can be
  1195. # found. If left blank, it is assumed the dot tool can be found in the path.
  1196. DOT_PATH =
  1197. # The DOTFILE_DIRS tag can be used to specify one or more directories that
  1198. # contain dot files that are included in the documentation (see the
  1199. # \dotfile command).
  1200. DOTFILE_DIRS =
  1201. # The MSCFILE_DIRS tag can be used to specify one or more directories that
  1202. # contain msc files that are included in the documentation (see the
  1203. # \mscfile command).
  1204. MSCFILE_DIRS =
  1205. # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
  1206. # nodes that will be shown in the graph. If the number of nodes in a graph
  1207. # becomes larger than this value, doxygen will truncate the graph, which is
  1208. # visualized by representing a node as a red box. Note that doxygen if the
  1209. # number of direct children of the root node in a graph is already larger than
  1210. # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
  1211. # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
  1212. DOT_GRAPH_MAX_NODES = 50
  1213. # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
  1214. # graphs generated by dot. A depth value of 3 means that only nodes reachable
  1215. # from the root by following a path via at most 3 edges will be shown. Nodes
  1216. # that lay further from the root node will be omitted. Note that setting this
  1217. # option to 1 or 2 may greatly reduce the computation time needed for large
  1218. # code bases. Also note that the size of a graph can be further restricted by
  1219. # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
  1220. MAX_DOT_GRAPH_DEPTH = 0
  1221. # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
  1222. # background. This is disabled by default, because dot on Windows does not
  1223. # seem to support this out of the box. Warning: Depending on the platform used,
  1224. # enabling this option may lead to badly anti-aliased labels on the edges of
  1225. # a graph (i.e. they become hard to read).
  1226. DOT_TRANSPARENT = NO
  1227. # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
  1228. # files in one run (i.e. multiple -o and -T options on the command line). This
  1229. # makes dot run faster, but since only newer versions of dot (>1.8.10)
  1230. # support this, this feature is disabled by default.
  1231. DOT_MULTI_TARGETS = NO
  1232. # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
  1233. # generate a legend page explaining the meaning of the various boxes and
  1234. # arrows in the dot generated graphs.
  1235. GENERATE_LEGEND = YES
  1236. # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
  1237. # remove the intermediate dot files that are used to generate
  1238. # the various graphs.
  1239. DOT_CLEANUP = YES